TriggerSmart Wireless Multi Sensor
This battery operated wireless multi sensor is specifically designed to work with the TriggerSmart MKII Control Unit
The new TriggerSmart Wireless Multi Sensor in conjunction with the new MKII Control Unit, triggers your camera in the following modes:
- IR Beam Breaking (requires IR Battery powered transmitter)
- Sound (sudden increase)
- Light Intensity (sudden increase)
In addition there is an auxiliary input enabling the use of other wired sensors such as the Triggerbeam,Triggerscout and Tilt sensor
WIRELESS MULTI SENSOR SPECIFICATIONS
- LINKING - Via 433Mhz wireless link to controller (max 30m distance from controller)
- WIRELESS CHANNELS - 16 programmable channels
- ACTIVATION DELAY - < 30ms
- IR BEAM - Range - 20 cm to - 2m. Wavelength 850 nm
- FLASH SENSOR - Range 1 to 1500 lumens. Sensitivity 10 lumens
- SOUND RESPONSE - Microphone sensitivity - frequency response 50 to 5000 Hz at 3 Db
- AUXCILLARY INPUT - Low to activate.
- POWER REQUIREMENTS - x2 CR2032 batteries
- POWER CONSUMPTION - About 3mA on standby
- SIZE - (W)7.5cm x (D)5cm x (H)2.6cm.
- SENSOR MOUNTING - ¼ inch UNC thread (standard tripod thread)
- WEIGHT - 70g
- WATERPROOFING - IP54
- TEMPERATURE - 0 to 35oC. (operating). -10 to +50OC. (non- operating)
- SHOCK - 12 Newtons
Manufacturer SKU | TSWS-2 |
---|---|
Brand | TriggerSmart |
Trigger Accessory Type | IR Receiver |
There is no video for this product.