Hedler Profilux LED 2000 DMX Light

The daylight lamp boasts a colour temperature of 5600K (+/- 100K) and a colour rendering index (CRI) of over 96. It delivers a light output equivalent to a 2000 W halogen lamp while consuming only 195 W of power. This results in exceptional light output and energy efficiency.

The HEDLER Profilux LED 2000 DMX is fitted with a Fresnel lens and can be adjusted from spot to floodlight with a beam angle of 10° to 75°, simply by turning the focusing knob. The unit can be used with all the existing Hedler reflectors and softboxes: full integration into an existing system!

LED soft starting, digital display with light output power indicator, service indicator and status LEDs, integrated power supply, cooling control automatically and manually, recalibration option, automatic mains voltage recognition, multi-voltage 110 - 230 V, overheating protection, safety switch-off, operation-hour counter. 

With its compact size and lightweight construction, it is perfectly suited for studio and location work.

The Profilux 2000 LED produces a light beam that is very low in heat, a very important feature for sensitive materials and humans!

The HEDLER Profilux LED 2000 is compatible with a vast range of light shaping accessories used by other Hedler Daylight and Tungsten units: reflectors, honeycombs, softboxes, striplights, reflex umbrellas and many more.

Additionally, the light features two 5-pin DMX connectors on the back, allowing
control via a DMX controller. The upper connector is for controlling the connected light, while the lower connector is for linking and passing the DMX signal to additional lights. DMX addressing is done directly on the device, requiring no additional accessories.

Features:

• Light output up to 2000 W (compared with a standard halogen lamp)
• 195 W power consumption
• Power supply integrated into the light housing, replaceable LED unit if necessary, and repairable components
• up to 259,000 lux
• flicker-free
• Continuous adjustment from spot to floodlight
• dimmable by 5% - 100% light output at constant colour temperature
• very quiet cooling
• Service life of approximately 50,000 hours
• Compatible with the entire range of HEDLER light shapers and, via HEDLER speed ring adapters, also compatible with existing light shapers from Bowens, Broncolor, Elinchrom, Hensel, and Profoto
• 5-pin XLR plug and socket for easy integration into existing systems