LEE Filters 100mm System Polyester 47B Tricolour Blue Standard Filter
The LEE Filters 100mm System Polyester 47B Tricolour Blue Standard Filter is a separation filter. Maximum transmission at 440nm.
These filters are made from a flexible high quality polyester material that is approximately 1mm thick. They are supplied un-mounted by default and as such are incompatible with the standard 2mm filter slots on Lee Filters holders. This is to allow them to be cut & shaped to fit alternative applications where a rigid resin filter would not be suitable. If you do wish to use these filters with the 100mm System Holder then you will need to either purchase a pack of 100x100 plastic filter mounts, modify the holder with 1mm Side Blades, or opt for the Polyester B&W Technical Set in which some of the filters are available pre-mounted. We would personally recommend the resin filters for most normal use.
Filters are widely used by black & white photographers for creative effect - most commonly to increase contrast between sky and cloud. However, care should be taken, because as much as a black & white filter darkens one colour, it lightens another - specifically, any colour that is similar to its own. A red filter, for example, makes a red pillar box appear almost white, and a blue sky as almost black.However, a red filter also absorbs green, which would block up the foreground of a verdant landscape.
The Black & White filters in the LEE Filters range can be used in conjunction with others, such as the polariser and neutral density standards and graduates.
|Filter Effect||Tricolour (Seperation)|
|Filter System||LEE 100mm|